Description Reviews The Powerflex PFF5-1315 Rear Sway Bar Link Rod Bushing are a simple, but effective design made from Purple 80A material. Rear Sway Bar Link Rod Bushing Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to get soft and pliable over time and allow the sway bar to flex too much. Stiffer bushings restore stability and performance. Powerflex polyurethane bushings are designed to decrease the amount of deflection in your car's suspension for better handling, more driver feedback, and better tire wear. Powerflex uses premium polyurethane materials for minimal NVH (noise, vibration, harshness) and increased longevity over the stock rubber bushings. Bushings come in pre-determined durometers (measured hardness) from Powerflex to work best in each particular location. The street bushing will work best for mostly everyone. They have been spec'd by Powerflex to be the best durometers for your application and are 70A (Yellow), 80A (Purple), and 95A (Black). Powerflex grease is supplied with every dynamic product. We suggest using only this grease for lubrication. Due to grooves and knurls cast into the material to hold the lubricant, bushings will rarely need re-lubing. We do not suggest using an "anti-seize" product for lubrication. Want a stiffer bushing? Have a track car? Try "The Black Series,"a new range of bushings developed for Race, Rally and Circuit use. The Powerflex Black Series bushings are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. Currently Special Order at this time. Also Fits:BMW 1 Series F40 1 Series (2018+) 2 Series F44 2 Series Gran Coupe (2019+ F44 2 Series Gran Coupe (2019+) X Series F48, F49 X1 (2016-ON) F39 X2 (2017-ON) MINI Cooper Gen 3 F55 / F56 (2014+) Warranty: All Powerflex bushings are made in the UK and come with an unlimited mile warranty.