K1 Technologies H-Beam Connecting Rod G2

(No reviews yet) Write a Review
6.00 LBS
Calculated at Checkout

We have 2 sets in STOCK. Our Warhouse had about 18 sets.  Once these are sold, they will no longer be available. Manufacture discontinued this great part.

K1 Technologies H-Beam Connecting Rod are a matched set of 4 rods; w/ ARP 2000 Bolts (BT61501-2) #005EB16132 for you MINI Cooper S with the N14 or N18 motor.

K1 Technologies connecting rods offer world-class performance at an affordable price. Our race-ready connecting rods are made from 4340 forged steel, use premium bushing material and are hand finished in the USA. K1’s Engineering Team has decades of experience designing components for professional racing engines and designs each rod for demanding race applications. Don’t trust your engine to anything but K1 Rods!
  • 4340 Forged Steel* - Strength, toughness and resistance to impact
  • Proprietary ARP Bolts* -  Asymmetrical threads
  • Pin oiling* -  Extra lubrication to minimize pin wear
  • Heavy Radii* -  Minimizes clearance without focusing stress in tight radii
  • Thicker Blades* -  Minimizes outward bowing at peak combustion pressure
  • Rod Offset* -  Center small end to bore center optimizes horsepower
  • + / -.000050 (50 millionths) tolerance on big end housing bore** -  Longer bearing life
  • High tolerance center to center length (< .001”)* -  Increased horsepower and efficiency
  • Specifically engineered for demanding race applications* - Strength for high horsepower applications while keeping

Rod Specs:

  • BE Width: 20.85mm
  • Bolt Size: 3/8in
  • Gram Weight: 506 Grams
  • Housing Bore: 49
  • Length: 138.5mm
  • PE Width: 20.85mm
  • Pin Diameter: 20mm
  • Main Bearing Bore: 48.00

Note:  After testing we have learned that the block will need a small relief cut for the rod to clear the bottom of the cylinder wall on both sides. You will have to decide if the cost savings vs bolt-on are are worth it for you.